+49 (0) 6021 / 40 27-0

Lightweight concrete anchor

Anchors for lightweight concrete are designed for wall-like elements made of concrete with open structure resp. lightweight concrete with low concrete strengths. A U-profile welded to the anchor foot guarantees the safe transfer of force into the lightweight concrete. With three different designs of the anchor head, the requirements for a specific lifting device for the transport and mounting process can be met.

three versions: with integrated wire rope loop, threaded insert or spherical head
load up to 4 t

Lifting loop with threaded end

For the complete range of PHILIPP Threaded transport anchors the Lifting loop with threaded end, consisting of a galvanised wire rope, can be used for axial and diagonal tension.

Wirbelstar

The Wirbelstar is a lifting device for the PHILIPP threaded anchor system which is particularly suitable for lateral and diagonal tension load cases. Therefore it can be used excellently for the erecting of e.g. horizontally manufacured elements.

Wirbelstar KH

The Wirbelstar is a lifting device for the PHILIPP threaded anchor system which is particularly suitable for lateral and diagonal tension load cases. Therefore it can be used excellently for the erecting of e.g. horizontally manufacured elements. Futhermore, the PHILIPP Wirbelstar KH is especially designed for the KH system with extra small recesses in the precast concrete element.

Lifty

For a daily use in the precast plant or on the construction site the Lifty is a robust and universally applicable lifting device for the PHILIPP threaded anchor system. It consists of a forged ring bolt with a welded chain link, both galvanised.

Lifty with wire rope

The Lifty with wire rope is a universally applicable lifting device for the PHILIPP threaded anchor system. It consists of a forged ring bolt with a thread and galvanised pressed-steel wire rope.

Adapter for lateral tension

For the use of a Lifting loop with threaded end with lateral tension up to 90° the special Adapter for lateral tension is available.

Marking ring

Both, the identification of a threaded anchor in installed condition as well as a quick assignment to the corresponding lifting device is done by the marking ring with its color-code.

Marking ring with clip

A marking ring identifies a threaded anchor in installed condition and fixes the position of an additional reinforcement by its clip.

Sealing cap (plastic)

Sealing caps (plastic) close threaded inserts of all sizes independent of a recessed or surface-flush installation of the anchor.

Magnetic fixations

Magnetic fixations are used to fix threaded anchors or inserts to a steel mould.

KH system

For demanding concrete surfaces the KH system is an ideal solution as it creates only very small recesses in the concrete element for the transport anchors.

Threaded adapter

The Threaded adapter is used to fix threaded anchors or inserts to a timber or steel mould.

Spherical head lifting clutch

Exclusively for the Spherical head anchor system the Spherical head lifting clutch is designed and enables with its simple mechanism an easy, safe and very fast (un)coupling of a precast element. Due to its robust design it is very durable and therefore ideal for daily use. In order to increase the safety of the clutch a check gauge for a fast and easy test of important wear measurements is available.

Spherical head accessories

For an optimum fixing of spherical head anchors and easy coupling of a lifting clutch various recess formers are available for this anchor system.

Wall